Multi-modal data acquisition system with active electrodes

ActiveTwo is a powerful new high-resolution biosignal acquisition system that incorporates some revolutionary concepts.  Active electrode technology is just one of the significant innovations in the ActiveTwo system.  By placing active electronics within millimeters of the actual electrode contact, ActiveTwo virtually eliminates the need to prepare the scalp before applying electrodes.  This can cut measurement preparation time by an estimated 15 -30 minutes for most laboratories! 

ActiveTwo can also be equipped with additional sensors for respiration, skin conductance, temperature, plethysmograph (pulse) and other parameters.  An optional isolated analog input box makes it possible to acquire almost any type of signal synchronously with the signals sampled by the ActiveTwo A/D box.

As an added benefit, ActiveTwo comes with powerful data acquisition software developed in National Instruments' LabView.  We provide the compiled software so you do not need to own LabView, and you do not need to be a programmer to operate the system.  For those laboratories with programming resources, the source code is provided so that you can add any special features that you may need. 

Mobile biosignal acquisition and processing on the Pocket PC

g.MOBIlab - g.tec's portable biosignal acquisition and analysis system - is the perfect tool for recording multimodal biosignal data on a standard Pocket PC. This allows to investigate brain-, heart-, muscle-activity, eye movement, respiration, galvanic skin response and other body signals.  g.MOBIlab comes with 4 EEG/EOG, 2 ECG/EMG channels and 2 analog inputs which can be utilized for other sensors. A switch can be connected for external triggering of the data.

Multi-modal data acquisition under MATLAB

g.DAQsys is the perfect tool for all kinds of data acquisition from physiological research to applied industrial research. The system runs under MATLAB and provides data acquisition, online visualization and storage of up to 64 channels. In addition to the PC–version (with application dependent 16, 32 or 64 channels) we offer a portable version with 16 or 32 analog channels. g.DAQsys allows the simultaneous acquisition and analysis of biosignals and external signals.

A special connector box gives access to all inputs and outputs for communication with external devices such as g.BSamp and g.STIMunit.

Biosignal Real-time Processing System under MATLAB/Simulink

g.RTsys is dedicated for biosignal and other technical signal data acquisition and real-time analysis. g.RTsys is available as PC version (16-, 32-, 48- or 64-analog input channels, digital inputs/ outputs, analog outputs) and as a portable, battery supplied notebook-version (PCMCIA board with 16- or 32 analog input channels). A connector box provides access to all inputs and out-puts to connect g.RTsys to g.BSamp and/or to g.STIMunit as well as to customer specific systems.